Toro Recycler 48-cm 20904BC Operator's Manual
![Toro Recycler 48-cm 20904BC Mower manual cover](/images/WQaRKGKglkXkItLkZeCSIuuC/thumbs/thumb175x175.webp)
To start the mower, ensure the fuel valve is open, the spark plug is connected, and the throttle is set to 'Choke' if the engine is cold. Pull the starter handle firmly.
Check the fuel level, ensure the spark plug is attached, inspect the air filter for clogs, and verify the ignition switch is on.
To adjust the cutting height, use the height adjustment levers located on each wheel. Move the levers to the desired height setting.
Perform regular maintenance by checking the oil level, cleaning or replacing the air filter, sharpening or replacing the blade, and ensuring all nuts and bolts are tight.
Disconnect the spark plug wire, tilt the mower to access the deck, and use a hose to wash off grass clippings. Ensure the mower is dry before reconnecting the spark plug.
Ensure the blade is sharp and not damaged. Check for clogs in the deck and confirm that the grass is not too wet or too tall.
Regular maintenance, such as cleaning the air filter, ensuring the blade is sharp, and using the recommended grade of fuel, can improve fuel efficiency.
Check for debris lodged in the blade or deck, ensure the blade is balanced and not bent, and inspect for loose parts or fasteners.
For off-season storage, drain the fuel, clean the mower, disconnect the spark plug, and store it in a dry, sheltered area. Consider lubricating moving parts to prevent rust.
To replace the spark plug, disconnect the spark plug wire, use a spark plug socket to remove the old plug, and install a new plug by hand before tightening with a socket.