Toro Recycler 48-cm 20803 Operator's Manual
![Toro Recycler 48-cm 20803 Mower manual cover](/images/EvylbnxQEbloNRgxzWyMmcuU/thumbs/thumb175x175.webp)
To start the Toro Recycler 48-cm 20803 Mower, ensure that the fuel valve is open and the throttle is set to 'fast'. Pull the starter rope with a smooth and steady motion until the engine starts.
Use SAE 30 or 10W-30 oil for temperatures above 32°F (0°C) and 5W-30 oil for temperatures below 32°F (0°C). Always check the oil level before each use.
Sharpen the blade at least once a season or after every 25 hours of use to ensure a clean cut and healthy lawn.
After each use, disconnect the spark plug wire, tilt the mower to access the underside, and use a hose to remove grass clippings from the deck. Be sure to dry the deck thoroughly to prevent rust.
To improve cutting performance, regularly clean the mower deck, sharpen the blade, and maintain proper tire pressure. Additionally, mow with a sharp blade when the grass is dry and not too tall.
Check the fuel level and quality, inspect the spark plug for wear or damage, and ensure the air filter is clean. Also, make sure the safety features, such as the blade control bar, are engaged properly.
Replace the air filter once a season or after 25 hours of use. If the mower is used in dusty conditions, check the filter more frequently and replace it as needed.
To winterize the mower, empty the fuel tank or add a fuel stabilizer, change the oil, remove the battery (if applicable), and store the mower in a dry place. Clean the mower thoroughly and cover it to protect it from dust and debris.
To adjust the cutting height, use the height adjustment lever located near each wheel. Set all wheels to the same height for an even cut.
Regular maintenance includes checking and changing the oil, cleaning or replacing the air filter, sharpening the blade, checking tire pressure, and cleaning the mower deck.