Toro Recycler 34-cm 21060 Operator's Manual

Ensure the fuel tank is filled and the oil level is adequate. Pull the starter rope firmly while holding down the safety bar. Release the rope slowly once the engine starts.
Check the fuel level, ensure fresh fuel is used, and inspect the spark plug for wear or damage. Clean or replace the air filter if necessary.
Sharpen the mower blade every 20-25 hours of use or at the beginning of every mowing season to maintain cutting efficiency.
Disconnect the spark plug and use a garden hose to rinse off grass clippings and debris. Avoid using high pressure to prevent damage.
Regularly clean the deck, keep the blade sharp, and ensure the tire pressure is within the recommended range. Mow when the grass is dry.
Regular tasks include checking the oil level, cleaning or replacing the air filter, inspecting the spark plug, and sharpening the blade.
Use the height adjustment lever located near the wheels. Adjust all four wheels to the same height to ensure an even cut.
Excessive vibration can be caused by an unbalanced blade or debris lodged in the mower deck. Inspect and balance the blade, and clean the deck thoroughly.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 10W-30 for colder temperatures. Check the owner's manual for specific brand recommendations.
Drain the fuel tank or add a fuel stabilizer. Clean the mower, remove the spark plug, and store it in a dry, sheltered location.