Toro Recycler 22-inch 20333C Operator's Manual

To start the mower, ensure the fuel valve is open and the spark plug is connected. Pull the starter handle firmly while holding down the safety bar.
Use SAE 30 or SAE 10W-30 oil for best performance in temperatures above 32°F.
Blades should be sharpened at least once per mowing season or more often if cutting thick or wet grass.
Check the fuel level, ensure the spark plug is connected, examine the air filter for clogs, and verify that the safety bar is engaged.
After each use, rinse the mower deck with a garden hose to remove grass clippings. For a deeper clean, use a putty knife to scrape off any buildup.
Adjust the cutting height to a higher setting and ensure the wheels are set to the same height. Consider using the rear-wheel drive for better traction.
Check for debris lodged in the blades or under the deck. Ensure the blades are balanced and securely fastened.
Remove the air filter cover, take out the old filter, and replace it with a new one. Ensure the new filter is correctly seated before securing the cover.
It is not recommended to mow wet grass as it can clog the mower deck and cause poor cutting performance. Wait until the grass is dry for the best results.
Drain the fuel tank, clean the mower thoroughly, and store it in a dry, sheltered location. Consider removing the battery (if applicable) and storing it separately.