Toro Recycler 22-inch 20036 Operator's Manual
![Toro Recycler 22-inch 20036 Mower manual cover](/images/HuMkZNDZPaVdkpTLiXqHvmqz/thumbs/thumb175x175.webp)
To start the Toro Recycler 22-inch 20036 Mower, ensure the mower is on a flat surface, the blade control bar is disengaged, and the fuel tank is filled. Pull the starter rope firmly to start the engine.
Use SAE 30 or SAE 10W-30 motor oil for the Toro Recycler 22-inch 20036 Mower for optimal performance. Ensure the oil is suitable for 4-cycle engines.
To change the oil, warm up the engine, then turn it off. Remove the oil fill cap and tip the mower to drain the oil into a pan. Refill with new oil and replace the cap.
Check the fuel level, ensure the spark plug is connected, and inspect the air filter for clogs. Clean or replace components as necessary.
Remove the air filter cover, take out the filter, and clean it with soapy water. Allow it to dry, then lightly oil it before reinstalling.
Disconnect the spark plug, remove the blade, and use a file or sharpening tool to sharpen the edge evenly. Balance the blade before reinstalling.
Replace the spark plug every 25 hours of operation or at the beginning of the mowing season to ensure reliable starting and performance.
Drain the fuel, change the oil, clean the deck, and remove the battery if applicable. Store in a dry place. Consider adding a fuel stabilizer.
Use the height adjustment levers located near each wheel to raise or lower the cutting height. Ensure all wheels are set to the same height.
Check for debris caught in the blade, ensure the blade is balanced, and inspect the engine mounting bolts for tightness. Tighten or clean as needed.