Toro Recycler 21-inch 20326 Operator's Manual

To start the mower, first ensure the fuel valve is open. Press the primer bulb three times if the engine is cold. Pull the starter handle while holding the safety bar against the handle.
Use SAE 30 oil for temperatures above 40°F (4°C) and 10W-30 for temperatures below 40°F (4°C). Ensure the oil is API service classification SJ or higher.
The blade should be sharpened after every 25 hours of use or at least once per mowing season for optimal performance and a clean cut.
Check the fuel level and ensure the fuel valve is open. Verify the spark plug is clean and properly connected. Examine the air filter for dirt and replace if necessary.
To adjust the cutting height, use the height adjustment levers located on each wheel. Move the lever to the desired height position, ensuring all four wheels are set to the same height.
Regularly check and change the oil, clean or replace the air filter, sharpen the blade, and inspect the spark plug. Keep the deck clean to prevent grass buildup.
Drain the fuel tank or add a fuel stabilizer, change the oil, clean the underside of the deck, and store the mower in a dry location. Consider removing and storing the blade separately.
First, remove the air filter cover by unscrewing the fastener. Take out the old filter and insert a new one. Reattach the cover securely.
Check for a bent or unbalanced blade. Inspect for debris lodged in the deck or damage to the engine mounts. Tighten any loose parts and ensure the blade is properly secured.
Yes, the Toro Recycler mower is designed for mulching. Make sure the mulching plug is installed, and adjust the cutting height to ensure efficient mulching.