Toro Recycler 20-inch 20318 Operator's Manual

Toro Recycler 20-inch 20318 Mower manual cover
Pages 16
Year 2012
Language(s)
English en

Toro Recycler 20-inch 20318 Mower Specification

The Toro Recycler 20-inch 20318 Mower is designed to deliver exceptional grass-cutting performance with user-friendly features. This model is powered by a robust 159cc Toro OHV engine, providing the necessary torque for efficient mowing. It incorporates the Recycler Cutting System, which finely chops grass clippings into a nutrient-rich mulch, enhancing lawn health. The 20-inch steel deck is engineered for durability and optimal grass dispersion, ensuring a clean and even cut.

The mower offers a variable speed self-propel system, allowing users to adjust the pace to their comfort and the lawn conditions. The height of cut can be easily adjusted between 1 and 4 inches through a dual-lever mechanism, providing versatility for different grass types and preferences. For ease of use, the mower features a compact and lightweight design, making it maneuverable around obstacles and easy to store.

Additionally, the mower includes a washout port for convenient cleaning of the underside of the deck, maintaining performance and prolonging the life of the mower. The ergonomic handle design enhances user comfort during operation, reducing fatigue over extended periods of use. With its combination of power, versatility, and user-centric design, the Toro Recycler 20318 is a reliable choice for homeowners seeking efficiency and quality in their lawn care routine.

Toro Recycler 20-inch 20318 Mower F.A.Q.

How do I start the Toro Recycler 20-inch 20318 Mower?

To start the Toro Recycler 20318 Mower, first ensure the fuel tank is filled and the oil level is adequate. Press the primer bulb three times, pull the safety bar to the handle, and then pull the starter rope briskly.

What should I do if the mower won't start?

If the mower won't start, check the fuel level and ensure the fuel is fresh. Inspect the spark plug for wear or damage and clean or replace it if necessary. Additionally, ensure the air filter is clean and the primer bulb is functioning.

How often should I change the oil in my Toro Recycler 20318?

Change the oil after the first 5 hours of use, then every 25 hours of operation or at the start of each mowing season. Use SAE 30 or 10W-30 oil for best performance.

What is the correct way to clean the mower deck?

To clean the mower deck, ensure the engine is off and disconnect the spark plug. Use a hose to spray underneath the deck, and scrape off any remaining grass clippings or debris with a plastic scraper.

How do I adjust the cutting height on the Toro Recycler 20318?

To adjust the cutting height, locate the height adjustment levers on each wheel. Move the levers to the desired height setting, ensuring all wheels are set to the same level for an even cut.

Why does my mower leave uncut grass behind?

If the mower leaves uncut grass, the blade may be dull. Sharpen or replace the blade as necessary. Also, check that the cutting height is appropriate for the grass conditions and that the underside of the deck is clean.

How do I replace the spark plug on a Toro Recycler 20318?

To replace the spark plug, disconnect the spark plug wire and use a spark plug wrench to remove the old plug. Install the new spark plug and tighten it securely, then reconnect the spark plug wire.

What maintenance is required at the end of the mowing season?

At the end of the mowing season, drain the fuel or add a fuel stabilizer, change the oil, clean the air filter, and inspect the blade for sharpening or replacement. Store the mower in a dry, secure location.

How can I improve the mower's mulching performance?

To improve mulching performance, mow when the grass is dry and avoid cutting more than one-third of the grass height at a time. Ensure the blade is sharp and the underside of the deck is clean.

What should I do if the mower vibrates excessively?

Excessive vibration may be due to a damaged or unbalanced blade. Inspect the blade for damage and balance it or replace it if necessary. Also, check for loose parts or fasteners and tighten them as needed.