Toro Powerlite CCR 38177 Operator's Manual
![Toro Powerlite CCR 38177 Snow Thrower manual cover](/images/XtXRqbvfOtPwSMKYcgRoXiDc/thumbs/thumb175x175.webp)
To start the Toro Powerlite CCR 38177, ensure the fuel valve is open, set the choke to the full position, and pull the starter handle while holding down the safety key.
Use fresh, unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol.
Change the oil after the first 2 hours of operation, and then every 25 hours or at the start of each snow season.
Check the fuel level, ensure the spark plug is connected, and verify the safety key is in place. If issues persist, consult the manual or a professional technician.
Regularly inspect the auger for wear and damage. Lubricate the auger shaft annually and replace any damaged parts immediately.
Drain the fuel tank, clean the snow thrower thoroughly, and store it in a dry, covered area to prevent rust and corrosion during the off-season.
Loosen the bolts securing the scraper blade, adjust it to the desired height, and then retighten the bolts to secure it in place.
Before the snow season, check the spark plug, replace old fuel, inspect the belts for wear, and ensure all bolts and nuts are tightened.
Check the drive belt for wear or damage and ensure it's properly aligned. If the belt is intact, inspect the control cable for tension and adjust if necessary.
Yes, but you should adjust the skid shoes to raise the auger housing to avoid picking up gravel. Always operate at a slower speed to prevent damage.