Toro Power Max 828LE 38632 Operator's Manual

Toro Power Max 828LE 38632 Snow Thrower manual cover
Pages 24
Year 2003
Language(s)
English en

Toro Power Max 828LE 38632 Snow Thrower Specification

The Toro Power Max 828LE 38632 is a robust snow thrower designed to tackle heavy snowfalls with efficiency and ease. It is equipped with a powerful 265cc OHV 4-cycle engine, providing substantial power for demanding clearing tasks. The snow thrower features a 28-inch clearing width and a 21-inch intake height, allowing it to handle large volumes of snow swiftly. Its patented Power Max Anti-Clogging System prevents clogging in deep, heavy snow by regulating snow intake, ensuring consistent performance without interruption. The Quick Stick chute control enables precise direction and distance adjustment of the snow discharge with a single, easy-to-use control.

The Toro Power Max 828LE incorporates a durable gearbox designed for longevity, coupled with a hardened gears and no shear pins, which reduces maintenance requirements. Its heavy-duty auger system consists of 11-inch serrated augers that efficiently break through compacted snow and ice. The machine is equipped with six forward speeds and two reverse speeds, providing versatile control for various snow conditions and user preferences. Its freewheel steering offers superior maneuverability, making it easy to navigate tight spaces and challenging terrains.

This snow thrower also includes heated hand grips for enhanced user comfort during prolonged use in cold weather. The 16-inch tires offer excellent traction on slippery surfaces, ensuring stability and safety. With an electric start system, the Toro Power Max 828LE ensures reliable ignition in severe weather conditions, eliminating the hassle of manual pull starts. This snow thrower is engineered with high-quality materials and advanced features, making it a dependable choice for homeowners seeking efficient snow removal solutions.

Toro Power Max 828LE 38632 Snow Thrower F.A.Q.

How do I start the Toro Power Max 828LE 38632 Snow Thrower?

To start the Toro Power Max 828LE 38632, ensure the fuel valve is open, set the choke to full, and the throttle to fast. Pull the starter handle or use the electric starter if equipped.

What type of fuel should I use for the Toro Power Max 828LE 38632?

Use clean, fresh, unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends above E10.

How do I troubleshoot if the snow thrower won't start?

Check for fuel in the tank, ensure the fuel valve is open, verify the spark plug is clean and connected, and make sure the choke and throttle are set correctly.

What regular maintenance does the Toro Power Max 828LE require?

Regular maintenance includes checking and changing the oil, inspecting and replacing the spark plug, checking the skid shoes and scraper bar for wear, and lubricating the chute and auger.

How do I adjust the skid shoes on the Toro Power Max 828LE 38632?

Loosen the skid shoe mounting nuts, adjust the skid shoes to the desired height ensuring they are even, and then retighten the nuts.

What should I do if the snow thrower is not throwing snow far enough?

Check for clogs in the chute, ensure the auger and impeller are not damaged, and verify that the engine is running at full throttle.

How do I safely store the snow thrower at the end of the season?

Drain the fuel tank, run the engine until it stops to clear the carburetor, clean the machine, and store it in a dry, protected area.

How can I change the oil in the Toro Power Max 828LE 38632?

Warm up the engine, remove the oil drain plug, allow the oil to drain completely, replace the plug, and refill with the recommended oil type and amount.

What should I do if the auger is not turning?

Check for debris blocking the auger, inspect the auger drive belt for wear or damage, and ensure the auger control cable is properly adjusted.

How do I replace the drive belt on the Toro Power Max 828LE 38632?

Remove the belt cover, release the tension on the belt, remove the old belt, install the new belt over the pulleys, and re-tension and secure the belt.