Toro Power Max 826OXE 38815 Operator's Manual

Toro Power Max 826OXE 38815 Snow Thrower manual cover
Pages 28
Year 2017
Language(s)
English en

Toro Power Max 826OXE 38815 Snow Thrower Specification

The Toro Power Max 826OXE 38815 Snow Thrower is a robust and efficient machine designed to handle heavy snowfall with ease. It is equipped with a powerful 252cc Toro Premium OHV 4-cycle engine that ensures reliable performance and smooth operation in extreme winter conditions. The snow thrower features a two-stage design, which efficiently breaks up and collects snow before discharging it through a durable chute, capable of rotating up to 200 degrees for precise snow placement. Its clearing width is 26 inches, with an intake height of 20 inches, allowing for substantial snow removal in a single pass.

The machine is engineered with the innovative Anti-Clogging System (ACS), which minimizes the risk of clogging by regulating the snow intake to maximize efficiency and maintain consistent operation. It also includes a Quick Stick control, enabling the user to easily adjust the chute direction and deflector angle with a single, intuitive control. The Power Max 826OXE is equipped with commercial-grade auger gearbox technology that ensures longevity and durability under demanding conditions.

Additionally, the snow thrower is designed for user comfort and ease of use. It features heated hand grips for added warmth during operation in cold weather and an electric start system for effortless ignition. The inclusion of rugged tires provides enhanced traction and stability on slippery surfaces, further augmenting the machine's performance capabilities. With its blend of power, efficiency, and user-friendly features, the Toro Power Max 826OXE 38815 Snow Thrower stands as a reliable choice for homeowners seeking to manage snow accumulation effectively.

Toro Power Max 826OXE 38815 Snow Thrower F.A.Q.

How do I start the Toro Power Max 826OXE 38815 Snow Thrower?

To start the Toro Power Max 826OXE 38815 Snow Thrower, ensure the fuel valve is open, the throttle is set to "Fast," the choke is on, and the ignition key is inserted. Then, pull the starter handle or use the electric start button if available.

What type of fuel should I use for my Toro Power Max 826OXE?

Use fresh, unleaded gasoline with an octane rating of at least 87. Avoid using gasoline with more than 10% ethanol content.

How do I perform regular maintenance on the Toro Power Max 826OXE Snow Thrower?

Regular maintenance includes checking the oil level, inspecting and replacing the spark plug if necessary, checking the auger and impeller for wear, and inspecting belts and cables for damage. Clean the machine after each use to prevent rust.

What should I do if the snow thrower does not start?

If the snow thrower does not start, ensure that there is fuel in the tank, the fuel valve is open, and the choke is set correctly. Check the spark plug for wear or damage and replace if necessary. Ensure the ignition key is properly inserted.

How can I improve the performance of my Toro Power Max 826OXE on heavy snow?

To improve performance on heavy snow, make sure the skid shoes and scraper bar are properly adjusted. Operate the snow thrower at a slower speed, and overlap your passes to prevent the machine from becoming overwhelmed.

How do I adjust the skid shoes on the Toro Power Max 826OXE?

To adjust the skid shoes, loosen the mounting nuts and slide the shoes up or down to the desired height. Ensure both shoes are set at the same height to maintain balance. Tighten the nuts securely after adjustment.

What is the proper way to store the snow thrower after winter?

To store the snow thrower, drain the fuel tank or add a fuel stabilizer, change the oil, and lubricate any necessary parts. Clean the machine thoroughly and store it in a dry, protected area.

How do I replace the auger belt on my Toro Power Max 826OXE?

To replace the auger belt, remove the belt cover, release the belt tension, and remove the old belt. Install the new belt by following the reverse process, ensuring it is properly seated on the pulleys. Replace the belt cover after installation.

What should I do if the snow thrower is leaving a thin layer of snow behind?

If the snow thrower is leaving a thin layer of snow, check the scraper bar for wear and adjust or replace it if necessary. Also, ensure that the skid shoes are set to the appropriate height for the surface you are clearing.

How do I troubleshoot the electric start system on the Toro Power Max 826OXE?

If the electric start system is not working, check the power cord for damage and ensure it is properly connected. Verify that the outlet is functioning. If the problem persists, inspect the starter motor and consult a professional if necessary.