Toro Power Max 724 OE 37770 Operator's Manual
![Toro Power Max 724 OE 37770 Snow Thrower manual cover](/images/AvJVRzfNRWxNFEhStdedUAbw/thumbs/thumb175x175.webp)
To start the Toro Power Max 724 OE 37770, ensure it is on a flat surface. Set the choke to the full position, prime the engine by pressing the primer bulb three times, and then pull the starter handle or use the electric start button if available.
Use clean, fresh, unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends higher than 10% to prevent engine damage.
Regularly inspect the auger for wear or damage. Tighten any loose bolts and replace worn parts. Lubricate the auger shaft annually with a high-quality lubricant.
Check the fuel level and ensure it is fresh. Verify the spark plug is clean and properly connected. Inspect the choke and primer bulb for proper operation. If issues persist, consult the user manual or a professional technician.
Drain the fuel tank or add a fuel stabilizer to prevent degradation. Clean the machine thoroughly, removing any debris. Store in a dry, covered area to protect from the elements.
Use the chute control lever located on the handle to adjust the direction. Move it left or right to aim where you want the snow to be discharged.
Use SAE 5W-30 oil for optimal performance in cold weather. The engine typically holds approximately 20 ounces, but refer to the user manual for exact specifications.
Disconnect the spark plug wire for safety. Remove the belt cover and guide, then carefully remove the old belt. Install the new belt and reassemble the components, ensuring the belt is properly aligned.
Inspect the drive cable for proper tension and adjust if necessary. Check the drive belt for wear or damage and replace if needed. Make sure the traction control lever is engaged.
Change the spark plug every 100 hours of operation or annually, whichever comes first. Regular inspection and cleaning can help maintain optimal engine performance.