Toro Power Max 1028LE 38642 Operator's Manual

Toro Power Max 1028LE 38642 Snow Thrower manual cover

Pages 24

Year 2003

Language(s)

of 24

Toro Power Max 1028LE 38642 Snow Thrower Specification

The Toro Power Max 1028LE 38642 Snow Thrower is a robust and efficient machine designed for tackling heavy snow removal tasks. It features a powerful 302cc OHV 4-cycle engine that provides reliable performance and enhanced power to clear deep snow with ease. The clearing width of 28 inches allows for efficient snow removal from driveways and sidewalks, while the intake height of 21.5 inches ensures it can handle heavy snowfalls.

This snow thrower utilizes a two-stage operation, which includes a durable auger to break up the snow and an impeller to throw it out through the chute, ensuring optimal clearing efficiency. The Quick Stick® chute control offers easy and precise control over the direction and height of the snow discharge, enhancing user convenience.

Equipped with the Power Max® Anti-Clogging System, it prevents clogging by regulating snow intake to maximize clearing efficiency and minimize downtime. The snow thrower features rugged, heavy-duty construction with a sturdy gearbox designed for long-lasting durability. The machine also offers enhanced maneuverability through its locking control handles that allow for single-hand operation, providing ease of use when making turns or adjustments.

The Toro Power Max 1028LE includes freewheel steering for enhanced control and maneuverability, making it easier to navigate through tough snow conditions. It is equipped with an electric start system, enabling quick and effortless engine startup in cold weather. This snow thrower is designed to provide reliable and efficient snow removal for residential and commercial users, ensuring pathways remain clear and safe during winter conditions.

Toro Power Max 1028LE 38642 Snow Thrower F.A.Q.

How do I start the Toro Power Max 1028LE 38642 Snow Thrower?

To start the Toro Power Max 1028LE, ensure the fuel shut-off valve is open, set the choke to the 'full' position, push the primer bulb twice, and pull the recoil starter handle. Alternatively, connect the electric starter cord and press the start button.

What type of fuel should I use for the Toro Power Max 1028LE?

Use unleaded gasoline with an octane rating of at least 87 and a maximum of 10% ethanol. Avoid using gasoline with methanol.

Why is my Toro Power Max 1028LE not throwing snow effectively?

Check for obstructions in the discharge chute or auger. Ensure the auger and impeller are not worn or damaged. Adjust the skid shoes and scraper bar to the proper height.

How can I change the oil in my Toro Power Max 1028LE?

Warm up the engine, then turn it off. Remove the oil drain plug and let the oil drain completely. Replace the drain plug and fill the engine with the recommended oil type and amount.

What should I do if the drive system is not engaging?

Check the drive cable for proper tension and adjust if necessary. Inspect the drive belt for wear or damage and replace if needed. Ensure the traction control lever is functioning correctly.

How do I store the Toro Power Max 1028LE for the off-season?

Drain the fuel or add a fuel stabilizer to the tank. Change the oil and clean the unit thoroughly. Store in a dry, protected area to avoid rust and corrosion.

What maintenance tasks should be performed regularly on my snow thrower?

Regularly check and tighten all fasteners, inspect the belts and replace if worn, lubricate all moving parts, and check the tire pressure. Review the operator's manual for a complete maintenance schedule.

How can I adjust the skid shoes on my Toro Power Max 1028LE?

Loosen the skid shoe bolts, adjust the skid shoes to the desired height, and retighten the bolts. Ensure both skid shoes are adjusted to the same height for even clearing.

What should I do if the snow thrower engine is running rough?

Check the air filter for dirt and clean or replace it if necessary. Inspect the spark plug for fouling and replace it if needed. Ensure the fuel is fresh and the fuel system is clean.

How do I replace the shear pins on the Toro Power Max 1028LE?

Turn off the engine and disconnect the spark plug wire. Align the holes in the auger and the shaft, then insert a new shear pin and secure it with a cotter pin. Repeat for each shear pin.