Toro HoverPro 400 02600 Operator's Manual

Toro HoverPro 400 02600 Mower manual cover
Pages 20
Year 2011
Language(s)
English en

Toro HoverPro 400 02600 Mower Specification

The Toro HoverPro 400 02600 Mower is designed to deliver exceptional performance on challenging terrains, making it ideal for maintaining areas that are difficult to mow with traditional machines. This model features a robust yet lightweight design, weighing approximately 12.5 kilograms, which enhances maneuverability and reduces operator fatigue. Powered by a reliable 4-stroke Honda GCV160 engine, the mower provides consistent power output and improved fuel efficiency. The HoverPro 400 is equipped with a 40-centimeter cutting width, allowing for efficient coverage, and offers adjustable cutting heights ranging from 18 to 30 millimeters to accommodate varying grass lengths and conditions.

The mower's unique hover capability is facilitated by an impeller that generates a cushion of air, enabling smooth operation over uneven surfaces and slopes up to 45 degrees. Its durable ABS polymer deck enhances durability while minimizing weight, contributing to its ease of use. Designed for user convenience, the Toro HoverPro 400 features an ergonomic handle that can be folded for compact storage and transport. The mower is also compatible with a range of accessories, such as transport wheels and a Hi-Rise kit, which further enhance its versatility and functionality.

This model prioritizes safety and ease of maintenance, with a straightforward design that allows for quick access to components for cleaning or servicing. The Toro HoverPro 400 02600 Mower is an excellent choice for landscape professionals and homeowners seeking a reliable, efficient solution for mowing challenging terrains.

Toro HoverPro 400 02600 Mower F.A.Q.

How do I start the Toro HoverPro 400?

To start the Toro HoverPro 400, ensure that the fuel tank is filled, the spark plug is connected, and the throttle is set to the 'Start' position. Then, pull the starter rope firmly until the engine runs.

What should I do if the mower does not hover properly?

Check if the impeller is clean and free of debris. Ensure that the ground is even and the grass is not too tall or wet. Adjust the cutting height if necessary.

How often should I change the oil in the Toro HoverPro 400?

Change the oil after the first 5 hours of use and then every 25 hours of operation or at the beginning of each mowing season, whichever comes first.

What type of fuel is recommended for this mower?

Use unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol content.

How can I sharpen the mower blades?

Remove the blades according to the manual instructions. Use a grinding wheel or a file to sharpen the cutting edges evenly. Balance the blade before reinstallation.

What is the correct way to store the mower for the winter?

Drain the fuel tank and run the engine until it stops. Clean the mower thoroughly, check for any worn parts, and store it in a dry, covered place.

How to clean the Toro HoverPro 400 after use?

Turn off the mower and disconnect the spark plug. Use a brush to remove grass and debris from the deck and impeller. Do not use water to clean the engine.

Why is the mower vibrating excessively?

Excessive vibration can be caused by an unbalanced blade or debris caught in the impeller. Check and clean the impeller and ensure the blade is balanced and properly installed.

What should I do if the Toro HoverPro 400 is hard to start?

Ensure the fuel is fresh and the correct type. Check the spark plug for wear and replace it if necessary. Also, make sure the air filter is clean.

How do I adjust the cutting height on the Toro HoverPro 400?

To adjust the cutting height, stop the engine and disconnect the spark plug. Move the height adjustment levers on each wheel to the desired position, ensuring all wheels are set to the same height.