Toro eRecycler FlexForce 52-cm eS52VST 21853 Operator's Manual

To start the mower, ensure the battery is fully charged and properly inserted. Press and hold the safety button on the handle, then pull back the bail lever toward the handlebar to engage the motor. Release the safety button while continuing to hold the bail lever.
If the mower does not start, check that the battery is charged and properly installed. Ensure the safety button and bail lever are engaged correctly. Inspect for any debris obstructing the blade and verify all safety features are in place.
To maintain battery life, charge the battery after each use and store it in a cool, dry place. Avoid leaving the battery on the charger for extended periods after it is fully charged. Regularly clean the battery contacts and inspect for any damage.
To adjust the cutting height, locate the height adjustment lever on each wheel. Move the lever to the desired position, ensuring all four wheels are set to the same height for an even cut.
After use, ensure the mower is turned off and the battery is removed. Use a brush or cloth to remove grass clippings and debris from the deck and blade area. Avoid using water directly on the mower to prevent electrical damage.
Store the mower in a dry, sheltered location. Remove the battery and store it separately in a cool, dry place. Clean the mower and cover it to protect against dust and debris.
First, check the charger and power outlet for functionality. Inspect the battery contacts for dirt or damage. If the issue persists, consult the user manual for troubleshooting or contact Toro customer support.
It's recommended to sharpen the mower blade at least once per mowing season, or more frequently if you notice a decrease in cutting performance. Always follow safety procedures when handling and sharpening the blade.
It is not recommended to use the mower on wet grass as it can lead to uneven cutting and potential clogging. Wet conditions can also increase the risk of slipping and electrical hazards.
If the mower stops unexpectedly, check for obstructions in the blade area or discharge chute. Ensure the battery has sufficient charge and is properly seated. Inspect the safety features to ensure they are not engaged.