Toro DH 220 74593 Operator's Manual
![Toro DH 220 74593 Tractor manual cover](/images/ikIdOtnPvbIskrcJpowPjZAU/thumbs/thumb175x175.webp)
To start the Toro DH 220 74593 Tractor, ensure the gearshift is in neutral, sit on the seat, and turn the ignition key to the start position. Release the key once the engine starts.
Use unleaded gasoline with an octane rating of 87 or higher for the Toro DH 220 74593 Tractor. Avoid using E85 fuel.
The oil should be changed after the first 5 hours of use, and then every 50 hours of operation or once per season, whichever comes first.
Check the battery connections, ensure there is sufficient fuel, verify that the spark plug is functioning, and make sure the safety switches are engaged.
To adjust the cutting height, use the lever located on the side of the tractor. Move it to the desired position to raise or lower the mower deck.
At the end of the season, clean the tractor, check and change the oil, inspect and clean the air filter, charge the battery, and store the tractor in a dry place.
Ensure the tractor is off and the spark plug is disconnected. Use a wrench to remove the blade bolt, replace the blade, and tighten the bolt securely.
Excessive vibration may be caused by a damaged blade, loose parts, or an unbalanced mower deck. Inspect these components and tighten or replace as necessary.
Remove the air filter cover, take out the filter, and gently clean it with soap and water. Let it dry completely before reinstalling. Replace if it's excessively dirty or damaged.
Check the drive belts for wear or damage, ensure the transmission fluid is at the correct level, and inspect the linkage for misalignment or damage.