Toro CL 700 51511 Operator's Manual
![Toro CL 700 51511 Trimmer manual cover](/images/YcUWuLCDxBkDmEBXbqyCrNws/thumbs/thumb175x175.webp)
To install the trimmer line, ensure the trimmer is turned off and unplugged. Remove the spool cap, and then wind the line onto the spool in the direction indicated. Thread the ends through the eyelets and reattach the cap securely.
First, check that the trimmer is plugged in and the power outlet is functioning. Ensure the extension cord is in good condition. If these are fine, inspect the trimmer switch and motor connections for any visible damage.
Regularly check and replace the trimmer line when it becomes too short or worn. Keep the trimmer head clean from debris and regularly inspect the guard and handle for any damage.
Use a heavy-duty extension cord rated for outdoor use. The cord length should not exceed the manufacturer's recommendations to prevent voltage drop and overheating.
Turn off and unplug the trimmer. Remove the spool cap by pressing the release tabs. Take out the old spool, insert a new one, and thread the line through the eyelets before snapping the cap back into place.
Ensure you're using the correct line size and type for the trimmer. Avoid hitting hard surfaces like rocks and concrete, and trim at the recommended angle to reduce line breakage.
Unplug the trimmer and use a brush to remove grass and debris from the spool area and guard. Wipe the exterior with a damp cloth and ensure all air vents are free of obstructions.
Yes, the trimmer can be used for edging. Turn the trimmer head to the desired angle for edging along sidewalks and driveways, and move the trimmer slowly for a clean edge.
Regularly inspect the motor housing for cracks or damage. Ensure the air vents are clear of debris to prevent overheating, and follow the manufacturer's instructions for lubrication if required.
Clean the trimmer thoroughly and remove any grass clippings. Store it in a dry place away from direct sunlight. Coil the power cord loosely to prevent damage.