Toro 51950A Operator's Manual

Pages 92

Year 2005

Language(s)

of 92

Toro 51950A Trimmer Specification

The Toro 51950A Trimmer is a robust gas-powered tool designed for efficient and precise trimming tasks in residential and commercial settings. This trimmer is powered by a reliable 25.4cc 2-cycle engine, providing ample power to tackle tough grass and weeds. It features a 17-inch cutting swath, enabling users to cover more ground in less time, thereby enhancing productivity. The trimmer's dual-line bump feed head allows for quick and easy line advancement, ensuring continuous operation without frequent interruptions. Designed with user comfort in mind, the Toro 51950A incorporates an ergonomic handle that reduces fatigue during extended use. Its lightweight construction, weighing approximately 10 pounds, further contributes to ease of maneuverability and control. The trimmer includes a straight shaft design, offering extended reach and the ability to access hard-to-reach areas, making it ideal for trimming around fences, trees, and garden beds. The engine is equipped with a spring-assisted starting system, which simplifies the start-up process, reducing the effort required to get the tool running. The Toro 51950A also features a translucent fuel tank, allowing users to easily monitor fuel levels for timely refueling. Designed for durability, the trimmer's components are constructed from high-quality materials to withstand regular use and harsh outdoor conditions. With its combination of power, efficiency, and user-friendly features, the Toro 51950A Trimmer is a reliable choice for anyone seeking a versatile and effective trimming solution.

Toro 51950A Trimmer F.A.Q.

How do I start the Toro 51950A Trimmer?

To start the Toro 51950A Trimmer, ensure the fuel tank is filled, set the choke to the "Start" position, press the primer bulb several times until fuel is visible, and then pull the starter rope briskly. Once the engine starts, move the choke to the "Run" position.

What type of fuel should I use for the Toro 51950A Trimmer?

Use a fresh, clean, unleaded gasoline with an octane rating of 87 or higher. Mix it with high-quality 2-cycle oil at a ratio of 50:1.

How often should I clean the air filter?

Clean the air filter every 10 hours of operation or more frequently in dusty conditions. Remove the filter and wash it with warm, soapy water. Allow it to dry completely before reinstalling.

What should I do if the trimmer line won't advance?

Ensure the line is properly wound and not tangled. Check for debris in the trimmer head and ensure the line is the correct size and type. If the issue persists, the trimmer head might need replacement.

How do I replace the trimmer line on the Toro 51950A?

To replace the trimmer line, first remove the spool from the trimmer head. Cut a length of line, insert it into the anchor hole, and wind it evenly onto the spool in the direction indicated. Reinstall the spool into the head.

Why does the engine stall when idling?

The engine may stall due to a clogged air filter, incorrect fuel mixture, or carburetor issues. Clean or replace the air filter, ensure the fuel mixture is correct, and adjust the carburetor settings according to the manual.

How do I store the Toro 51950A Trimmer for the winter?

To store the trimmer, empty the fuel tank and run the engine until it stops. Clean the trimmer thoroughly, inspect for damage, and store it in a dry place away from direct sunlight and corrosive materials.

What maintenance should be performed regularly on the Toro 51950A?

Regular maintenance includes checking and cleaning the air filter, inspecting the spark plug and replacing it if necessary, cleaning the trimmer head, and ensuring the fuel mixture is correct.

How do I adjust the carburetor on the Toro 51950A Trimmer?

To adjust the carburetor, locate the idle speed and mixture screws. Turn the idle screw clockwise to increase or counter-clockwise to decrease idle speed. Adjust the mixture screw to obtain smooth operation. Refer to the manual for specific settings.

What should I do if the trimmer vibrates excessively during use?

Excessive vibration can be due to a damaged or unbalanced trimmer head, loose parts, or an improperly installed trimmer line. Inspect the trimmer head, ensure all parts are secure, and check the line installation.