Toro 51620 Operator's Manual

To assemble the Toro 51620 Trimmer, first attach the blower tube to the main unit until it clicks into place. Ensure the vacuum bag is securely attached if you intend to use the vacuum function. Refer to the user manual for detailed instructions.
If the trimmer does not start, check the power connection and ensure the extension cord is properly plugged in. Verify that the outlet is functional. If the issue persists, inspect the power switch and cord for any damage.
To switch from blower mode to vacuum mode, turn off the unit and detach the blower tube. Attach the vacuum tube and ensure it is securely in place. Attach the collection bag to the rear of the unit.
Regular maintenance includes cleaning the air vents, checking for debris in the blower and vacuum tubes, and inspecting the power cord for damage. Ensure the collection bag is emptied after each use.
After use, unplug the trimmer, remove any remaining debris from the tubes, and wipe down the exterior with a damp cloth. Make sure the collection bag is emptied and free from blockages.
Excessive vibration may be due to debris lodged in the blower or vacuum tubes. Inspect and clear any blockages. Check that all attachments are securely fastened. If the problem persists, consult the user manual or contact customer support.
It is not recommended to use the Toro 51620 Trimmer in wet conditions to prevent electrical hazards and damage to the unit. Always operate the trimmer in dry conditions.
To replace the extension cord, ensure the trimmer is unplugged. Select an appropriate extension cord that matches the electrical requirements specified in the user manual. Connect the new cord securely to the trimmer and test for proper operation.
Wear safety goggles and gloves during operation. Be cautious of loose clothing or hair that could become entangled in the trimmer. Always operate the unit following the safety guidelines outlined in the user manual.
When storing, ensure the trimmer is clean and dry. Detach the tubes and store them in a cool, dry place away from direct sunlight and moisture. Coil the power cord neatly to prevent damage.