Toro 39092 Operator's Manual
![Toro 39092 Mower manual cover](/images/lFprnHXggDbVDktgZuNgfbDa/thumbs/thumb175x175.webp)
To start the Toro 39092 Mower, ensure the mower is on a flat surface. Hold the blade control bar against the handle, then pull the recoil starter handle briskly.
Check if there's enough fuel in the tank, ensure the spark plug is connected, and clean the air filter if necessary. If the problem persists, consult the user manual for troubleshooting tips.
Change the oil after the first 5 hours of use, then every 25 hours or at the start of each mowing season. Use SAE 30 or 10W-30 oil for optimal performance.
To clean the mower deck, remove the grass bag and connect a garden hose to the washout port. Run the mower for a few minutes with the blade engaged to allow the water to clean the underside.
To adjust the cutting height, locate the height adjustment levers on each wheel. Move the levers to the desired setting, ensuring each wheel is set to the same height.
Excessive vibration may be due to a damaged blade or debris lodged in the mower deck. Inspect the blade for damage and clear any debris. Balance the blade if necessary.
Ensure regular maintenance, such as changing the oil, cleaning the air filter, and sharpening the blade. Also, mow at the recommended speed and avoid cutting wet grass.
Uncut patches may result from a dull blade or incorrect cutting height. Sharpen or replace the blade and adjust the height settings to ensure a clean cut.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using fuel with more than 10% ethanol content to prevent engine damage.
To store the mower, clean it thoroughly, change the oil, and add a fuel stabilizer to the gas tank. Store the mower in a dry, sheltered location. Disconnect the spark plug to prevent accidental starting.