Toro 36-cm 21136 Operator's Manual
![Toro 36-cm 21136 Mower manual cover](/images/IUpsppBTtMyHeMMXDCgpDKeG/thumbs/thumb175x175.webp)
To start the Toro 36-cm 21136 Mower, ensure that the fuel valve is open, engage the safety handle, and then pull the starter rope firmly.
Check the fuel level, ensure the spark plug is connected, and verify that the safety handle is fully engaged. Clean or replace the air filter if necessary.
The oil should be changed after the first 5 hours of use and then every 25 hours of operation or at least once per mowing season.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 5W-30 for temperatures below 32°F (0°C).
Ensure the blade is sharp and clean, adjust the cutting height appropriately, and mow when the grass is dry.
Inspect the air filter every 25 hours of operation. Clean it by tapping it gently to remove debris or replace it if it is excessively dirty or damaged.
Drain the fuel tank, remove the battery, clean the mower thoroughly, and store it in a dry place to prevent rust and corrosion.
Check for loose or damaged blades, ensure all screws and bolts are tightened, and inspect for debris lodged in the deck.
Locate the height adjustment lever near the wheels and move it to the desired position. Make sure all wheels are set to the same height for an even cut.
Ensure the blade is sharp, the deck is clean and free of clippings, and that the mulching plug is properly installed.