Toro 32-cm 51370 Operator's Manual
![Toro 32-cm 51370 Trimmer manual cover](/images/hhtoeAyxDzyGmBzXNCpstjqn/thumbs/thumb175x175.webp)
To replace the line, first ensure the trimmer is turned off and unplugged. Remove the cap on the trimmer head by pressing the tabs on the sides. Take out the spool and remove any remaining line. Insert a new line into the spool, following the directional arrows. Place the spool back, ensuring the line ends are fed through the eyelets, and snap the cap back on.
First, check that the power cord is securely connected and that the outlet is functional. Ensure that the trimmer is switched on. If it still doesn't start, inspect the fuse or circuit breaker to rule out any electrical issues. If problems persist, contact Toro customer support for further assistance.
To clean the trimmer, turn it off and unplug it from the power source. Use a damp cloth to wipe down the exterior. For the head, remove any debris or grass clippings. Avoid using water directly on the motor or electrical components. Regular cleaning after each use will maintain optimal performance.
Frequent line breakage can occur if the line is too brittle, which could be due to age or exposure to sunlight. Consider replacing it with a fresh line. Additionally, ensure you are not trimming against hard surfaces such as concrete or rocks, as these can cause the line to snap.
The Toro 32-cm 51370 Trimmer does not have an adjustable cutting height. The cutting height is fixed by the design of the trimmer. For different grass lengths, you may need to adjust your trimming technique rather than the tool itself.
Regular maintenance includes cleaning the trimmer after each use, checking for wear and damage on the trimmer line and spool, and inspecting the power cord for any signs of damage. Additionally, ensure that the ventilation slots are free of debris to prevent overheating.
To enhance performance, use the recommended line size and type, keep the trimmer clean, and regularly check for any worn or damaged parts. Proper storage and handling will also contribute to maintaining its efficiency.
Excessive vibration can be due to an unbalanced or improperly installed spool. Turn off the trimmer, unplug it, and inspect the spool to ensure it's seated correctly. Check for any damage or deformation in the spool or head. Replace parts as necessary.
It is not recommended to use the trimmer in wet conditions due to the risk of electrical shock and potential damage to the motor. Wait for dry conditions to ensure safety and prevent damage to the equipment.
Before storing, clean the trimmer thoroughly and remove any grass or debris. Ensure it is completely dry to prevent rust or corrosion. Store it in a dry, cool place, ideally hanging or on a shelf to avoid pressure on the line spool. Cover it to protect from dust and dirt.