Toro 30115 Operator's Manual

To start the Toro 30115 mower, ensure that the fuel valve is open and the throttle is set to "FAST." Pull the starter rope firmly while holding the handlebar.
Use SAE 30 or 10W-30 oil for optimal performance in the Toro 30115 mower. Check the oil level regularly and change it as recommended in the user manual.
If the mower doesn't start, check the fuel level, ensure the spark plug is connected, and inspect the air filter for clogs. Replace the spark plug if necessary.
Sharpen the blades of the Toro 30115 mower after every 20-25 hours of use or if you notice uneven cutting. Ensure the blades are balanced to prevent vibration.
Perform maintenance tasks such as checking the oil level, cleaning the air filter, and inspecting the blades every 25 hours of use. Refer to the user manual for detailed maintenance schedules.
To clean the deck, ensure the mower is off and disconnect the spark plug. Use a hose to rinse off grass clippings and debris. For stubborn dirt, use a scraper or brush.
Check the drive belt for wear or damage, and ensure it is properly tensioned. Inspect the drive cable for proper operation and adjust if necessary.
Disconnect the spark plug wire and use a spark plug socket to remove the old plug. Install a new plug, ensuring it is the correct type and properly gapped, then reconnect the wire.
Ensure the blades are sharp, mow at the recommended height, and maintain proper engine speed. Regularly clean the deck to prevent clogging.
Always wear safety goggles and sturdy footwear. Clear the mowing area of debris, keep bystanders at a safe distance, and never refuel while the engine is hot.