Toro 22-inch 51490 Operator's Manual

To assemble the Toro 22-inch 51490 Trimmer, first attach the handle to the shaft and secure it using the provided screws. Then, attach the guard to the trimmer head and ensure it clicks into place securely. Double-check all connections before use.
To replace the line, first turn off and unplug the trimmer. Remove the spool cap and take out any remaining line. Cut a new 20-foot length of 0.065-inch diameter line, and wind it evenly in the direction indicated on the spool. Replace the cap securely.
Ensure the trimmer is plugged in correctly and the power source is working. Check for any tripped circuit breakers. Make sure the extension cord is not damaged. If these steps do not work, refer to the user manual for further troubleshooting tips.
Regularly clean the trimmer after use, removing any debris and grass clippings. Check the line regularly and replace it as needed. Inspect the guard and handle for any damage. Store the trimmer in a dry place to prevent rust and deterioration.
To improve battery life, charge the battery fully before initial use and avoid letting it completely discharge. Store the battery in a cool, dry place when not in use and avoid exposure to extreme temperatures. Regularly clean battery contacts.
Ensure the line is of the correct diameter and properly wound on the spool. Avoid contact with hard surfaces like concrete or rocks. If the problem persists, check for any burrs or sharp edges on the trimmer head that might be cutting the line.
It is recommended to use the line size specified by the manufacturer, which is 0.065 inches for optimal performance. Using a different size may affect performance and could potentially damage the trimmer.
Always wear protective eyewear and gloves when operating the trimmer. Ensure the work area is free of obstacles and debris. Do not operate the trimmer in wet conditions. Keep bystanders, especially children and pets, at a safe distance.
Clean the trimmer thoroughly to remove any dirt and debris. Store it in a dry, sheltered place. Detach the battery if applicable and store it separately. Ensure all components are intact and check for any needed repairs before storage.
Check the trimmer head for damage and ensure the line is properly installed. Inspect the shaft and connections for any looseness. If the problem persists, consult the user manual or contact Toro customer support for further assistance.