Toro 21-inch 26622 Operator's Manual

To start the Toro 21-inch 26622 mower, ensure it is on a flat surface. Press the primer bulb a few times if applicable, hold the safety bar against the handle, and pull the starter rope with a smooth, steady motion.
The Toro 21-inch 26622 mower typically requires SAE 30 oil for optimal performance. Always check the owner’s manual for specific recommendations.
To adjust the cutting height, locate the height adjustment levers on each wheel. Move the levers to the desired position to raise or lower the mower deck evenly.
If the mower won't start, check for fuel, ensure the spark plug is connected, and the air filter is clean. Also, inspect the primer bulb and ensure the safety bar is fully engaged.
It is recommended to sharpen the mower blades at least once a season or after every 20-25 hours of use to ensure a clean cut and healthy lawn.
After use, turn off the mower and disconnect the spark plug. Use a brush or cloth to remove grass clippings from the deck and blades. Avoid using water directly on the engine.
Regular maintenance includes checking the oil level before each use, cleaning the mower deck after each use, and performing annual tasks such as oil change, air filter replacement, and spark plug inspection.
To store the mower for the winter, perform a final cleaning, empty the fuel tank or add fuel stabilizer, change the oil, and store it in a dry, sheltered place. Remove the battery if applicable.
Excessive vibration could be due to an unbalanced blade or a damaged component. Check the blade for bends or damage and tighten any loose parts.
To replace the air filter, locate the air filter cover on the side of the engine, remove the cover screws, take out the old filter, and insert a new one. Ensure the cover is securely fastened.