Toro 21-inch 26620BG Operator's Manual
![Toro 21-inch 26620BG Mower manual cover](/images/VqFDxDxGpCswjhsfEYOXOutN/thumbs/thumb175x175.webp)
To start the Toro 21-inch 26620BG Mower, ensure the fuel valve is open, set the choke if the engine is cold, and pull the starter handle briskly.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 5W-30 for colder conditions. Always refer to the user manual for specific recommendations.
The mower blade should be sharpened every 20-25 hours of use to ensure optimal cutting performance.
To clean the mower deck, use a garden hose to wash off grass clippings and debris. Ensure the mower is off and disconnect the spark plug before cleaning.
If the mower is not starting, check the fuel level, ensure the spark plug is connected, and verify that the air filter is clean.
To adjust the cutting height, move the height adjustment lever located on each wheel to the desired position.
To improve performance in tall grass, increase the cutting height to avoid overloading the engine and ensure the blade is sharp.
At the end of the mowing season, clean the mower, drain the fuel, change the oil, and check the blade for sharpening or replacement.
To replace the spark plug, disconnect the spark plug wire, remove the old plug using a spark plug wrench, and install the new plug by screwing it in by hand before tightening with the wrench.
Excessive vibration may be due to an unbalanced blade. Check the blade for damage and ensure it is properly secured.