Toro 21-inch 20672 Operator's Manual

To start the Toro 21-inch 20672 Mower, ensure the fuel valve is open, the engine switch is on, and the choke is engaged if cold. Then, pull the starter grip slowly until you feel resistance, and then pull it briskly.
Use SAE 30 or SAE 10W-30 motor oil for the Toro 21-inch 20672 Mower. The oil should be changed after the first 5 hours of use, then every 50 hours or annually.
For cleaning, disconnect the spark plug, tilt the mower on its side (carburetor side up), and use a garden hose to wash out grass clippings. Avoid using a pressure washer.
Check if the fuel tank has fresh gasoline, inspect the spark plug for damage, and ensure the air filter is clean. These are common issues that can prevent starting.
Remove the spark plug wire, tilt the mower, remove the blade bolt, and sharpen the blade using a file or bench grinder. Balance the blade before reinstalling it.
Drain the fuel tank, clean the mower thoroughly, remove the battery (if applicable), and store the mower in a dry location. Cover it to protect from dust.
Check and clean the air filter every 25 hours of use or more frequently if operating in dusty conditions. Replace it every 100 hours or annually.
For optimal grass health, set the mowing height between 2.5 to 3.5 inches depending on the grass type and season. Adjust using the height adjustment levers.
Disconnect the spark plug, remove the blade and blade driver, access the belt under the deck, and install a new belt following the path of the old one. Reassemble all parts securely.
Excessive vibration may be caused by an unbalanced blade, loose parts, or debris accumulation. Inspect and clean the mower, and ensure all parts are tight and the blade is balanced.