Toro 18-inch 51978 Operator's Manual
![Toro 18-inch 51978 Trimmer manual cover](/images/qmDmxbGbMwhnHArDMmIYBfPE/thumbs/thumb175x175.webp)
The Toro 18-inch 51978 Trimmer requires a 50:1 fuel-to-oil ratio. Use unleaded gasoline and a high-quality 2-cycle oil.
To replace the trimmer line, turn off the trimmer, remove the spool, and wind new line onto it, ensuring it's tightly wrapped. Then, reattach the spool.
Check the fuel level, spark plug condition, and air filter. Ensure the choke is set correctly and the primer bulb is pressed several times.
Clean the air filter after every 5 hours of use. Replace it if it's damaged or excessively dirty.
No, the Toro 18-inch 51978 is designed only for use with trimmer line and cannot accommodate metal blades.
Drain the fuel tank, run the engine to clear the carburetor, clean the trimmer, and store it in a dry place.
Regularly check and replace the trimmer line, ensure the engine is properly tuned, and clean the cutting head.
The line may break if it's too brittle, the wrong size, or used against hard surfaces. Use the correct line size and avoid hitting concrete or rocks.
Set the choke to full, press the primer bulb 5 times, pull the starter rope until the engine starts, then move the choke to run.
Adjust the carburetor by turning the idle speed screw to achieve a smooth idle. Refer to the user manual for specific instructions.