Toro 18-inch 20857 Operator's Manual

To start the Toro 18-inch 20857 Mower, ensure the fuel tank is filled, the spark plug is connected, and the oil level is sufficient. Pull the starter rope firmly while holding the safety bar against the handle.
Use SAE 30 oil for temperatures above 40°F (4°C) and SAE 5W-30 or SAE 10W-30 for temperatures below 40°F (4°C). Ensure the oil meets API service classification SJ or higher.
Change the oil after the first 5 hours of operation and then every 25 hours or at least once per mowing season.
If the mower won't start, check the fuel level and quality, inspect the spark plug for damage or wear, and ensure the air filter is clean. Also, verify that the safety bar is engaged.
To clean the deck, disconnect the spark plug, tilt the mower to access the underside, and use a brush or scraper to remove grass clippings and debris. Avoid using water to prevent rust.
Regularly sharpen the mower blade, keep the air filter clean, and ensure the tires are properly inflated. Also, check the oil level and replace it when necessary.
Excessive vibration could be due to an unbalanced blade, loose components, or debris lodged in the mower. Inspect the blade for damage and ensure all bolts and nuts are tightened.
Adjust the cutting height by moving the height adjustment lever located on each wheel. Ensure all wheels are set to the same height for an even cut.
To store the mower, clean it thoroughly, change the oil, empty the fuel tank, and remove the spark plug. Store it in a dry, sheltered place. Consider lubricating moving parts to prevent rust.
Before each mowing session, check the oil level, inspect the air filter, ensure the blade is sharp, and verify that the safety features are functioning properly.