Toro 15-inch 51357 Operator's Manual
![Toro 15-inch 51357 Trimmer manual cover](/images/MAOvnFmgADoerliyWKYhOmbF/thumbs/thumb175x175.webp)
To install the spool, first unplug the trimmer. Remove the cap on the trimmer head by pushing in the tabs and pulling it off. Insert the spool into the trimmer head, ensuring that the line feeds through the eyelets. Replace the cap securely.
The Toro 15-inch 51357 Trimmer is designed to use 0.065-inch diameter trimmer line. Using the correct line size ensures optimal performance and reduces wear on the trimmer.
If the trimmer does not start, check if it is plugged into a working outlet. Ensure the extension cord is in good condition. Inspect the trimmer for any visible damage and replace the fuse if blown.
Regularly clean the trimmer after use, checking for debris in the vents and trimmer head. Inspect the line and replace it as necessary. Ensure all screws and fasteners are tight and store the trimmer in a dry place.
To adjust the handle, locate the adjustment lever on the handle. Loosen the lever, move the handle to the desired position, and then tighten the lever to secure it in place. This ensures ergonomic usage.
If the trimmer line breaks frequently, ensure you are using the correct line diameter. Avoid hitting hard surfaces while trimming and check for any sharp edges on the trimmer head that might be cutting the line.
Replace the trimmer line as needed, typically when it wears down to about 3-4 inches. Regular inspection can help maintain effective trimming performance.
It is not recommended to use the trimmer in wet conditions. Moisture can lead to electrical hazards and potential damage to the trimmer. Always use it in dry conditions.
To replace the trimmer head, ensure the trimmer is unplugged. Hold the spool housing and unscrew the head by turning it counterclockwise. Replace with a new head by screwing it on clockwise until secure.
Wear safety goggles, gloves, and sturdy footwear. Keep bystanders at a safe distance and avoid loose clothing that could get caught in the trimmer. Ensure the area is clear of debris before starting.