Toro 1100 51319 Operator's Manual
![Toro 1100 51319 Trimmer manual cover](/images/FYLwbMsvzhWAajWINYOFUNmB/thumbs/thumb175x175.webp)
To start the Toro 1100 51319 Trimmer, ensure it is properly assembled and filled with the correct fuel mix. Press the primer bulb several times, set the choke to the full setting, pull the starter rope until the engine attempts to start, then move the choke to the half setting and pull the rope again until the engine runs smoothly.
Regular maintenance includes cleaning the air filter, checking and replacing the spark plug annually, inspecting the fuel lines for leaks, and sharpening or replacing the trimmer line as needed.
To replace the trimmer line, first ensure the trimmer is off and cool. Remove the spool cap, take out the old line, and insert the new line following the directional arrows on the spool. Wind the line evenly and replace the cap securely.
If the trimmer does not start, check if there is sufficient fuel and that it is fresh. Ensure the spark plug is clean and connected. Verify the air filter is not clogged and the primer bulb is functioning properly.
Poor cutting performance can be due to a worn or incorrectly installed trimmer line, a clogged air filter, or a dull cutting blade. Check and address these components to improve performance.
The Toro 1100 51319 Trimmer requires a fuel mixture of unleaded gasoline and high-quality 2-cycle engine oil at a ratio of 50:1. Always use fresh fuel to avoid engine issues.
The air filter should be checked and cleaned after every 10 hours of operation, or more frequently if used in dusty conditions. A clean air filter ensures optimal engine performance.
Always wear protective eyewear, gloves, and appropriate clothing. Ensure the work area is clear of debris and bystanders are at a safe distance. Never operate the trimmer without all guards in place.
To store the trimmer, empty the fuel tank and run the engine until it stops. Clean the trimmer thoroughly, inspect for any damage, and store in a dry, secure location away from direct sunlight.
If the trimmer line breaks frequently, check for obstructions in the cutting path, ensure the correct line size is used, and inspect the line spool for wear or damage. Reduce speed when trimming tough vegetation.