Toro 10-inch 51465 Operator's Manual
![Toro 10-inch 51465 Trimmer manual cover](/images/jHltKqyySwIGDtZhkiYBhkMI/thumbs/thumb175x175.webp)
To assemble the Toro 10-inch 51465 Trimmer, first attach the handle to the shaft by aligning the holes and securing them with screws provided. Then attach the guard to the trimmer head using the appropriate fasteners. Ensure all parts are securely tightened before use.
If the trimmer line is not advancing, check if the line is tangled or stuck. Remove the spool, untangle the line, and re-thread it according to the instructions in the manual. Also, make sure that the line is not worn out and replace it if necessary.
The trimmer line should be replaced when it becomes brittle, frayed, or worn out. This usually depends on the frequency and intensity of use, but inspecting the line before each use is recommended.
Use an outdoor-rated extension cord with a gauge appropriate to the length of the cord. For example, use a 16-gauge cord for lengths up to 50 feet, and a 14-gauge cord for lengths up to 100 feet to ensure optimal power delivery.
After each use, wipe the trimmer with a damp cloth to remove debris. Check for any loose screws and tighten them. Regularly inspect the trimmer for damage and wear. Store the trimmer in a dry place to prevent rust and corrosion.
The trimmer may stop unexpectedly if the motor overheats or if there is an electrical issue. Ensure that the air vents are not blocked and that the extension cord is providing adequate power. Let the trimmer cool down before restarting.
To improve battery life, fully charge the battery before use and avoid letting it completely drain. Store the battery in a cool, dry place when not in use and avoid exposure to extreme temperatures.
Always wear safety glasses and long pants to protect against debris. Keep bystanders and pets away from the work area. Do not operate the trimmer in wet conditions to avoid electrical hazards.
The Toro 51465 Trimmer does not have an adjustable cutting height, but you can control the height by angling the trimmer head and adjusting your stance while trimming.
Excessive vibration can be caused by an unbalanced trimmer head or damaged parts. Inspect the trimmer head for debris and ensure that the line is evenly distributed. Check for any damage to the head or shaft and replace parts if necessary.