Sunbeam SUL495 Instructions Manual
![Sunbeam SUL495 manual cover](/images/06d4473c4f7963314dec6052/thumbs/thumb175x175.webp)
To descale your Sunbeam SUL495, fill the tank with a solution of equal parts water and white vinegar. Let it sit for 30 minutes, then rinse thoroughly with clean water to remove any residue.
If your humidifier isn't producing mist, check to ensure it's plugged in correctly and that the tank is filled with water. Additionally, clean the ultrasonic disk and ensure there are no mineral deposits.
It is recommended to clean your humidifier every week to prevent mold and bacteria build-up. Regular maintenance ensures optimal performance.
The Sunbeam SUL495 is not designed for use with essential oils. Adding oils can damage the unit and void the warranty.
The Sunbeam SUL495 humidifier has a low water indicator light that will illuminate when the tank needs refilling.
A loud noise may indicate that the unit is not placed on a flat surface or the water tank is not seated properly. Ensure both conditions are met to reduce noise.
It is best to use distilled or demineralized water in your humidifier to minimize mineral buildup and ensure cleaner mist output.
To reset the filter indicator light, press and hold the reset button for 3 seconds after replacing the filter.
Yes, a slight odor is normal when using the humidifier for the first time. This should dissipate after a few uses.
Before storing, empty and dry the water tank and base. Clean the unit thoroughly and store it in a cool, dry place to prevent mold and mildew.