Sunbeam SFH410 Instructions Manual
![Sunbeam SFH410 manual cover](/images/27acd932d5dccd7b922dd2f4/thumbs/thumb175x175.webp)
To turn on the Sunbeam SFH410 heater, ensure it is plugged into a power outlet, then press the power button located on the top panel of the unit.
If the heater does not produce heat, check if it is properly plugged in, the power switch is on, and the thermostat is set higher than the current room temperature. Also, ensure that the safety tip-over switch is engaged.
To clean the heater, first unplug it and let it cool. Use a soft cloth to wipe the exterior. For the grille, use a vacuum with a brush attachment to remove dust and debris. Never immerse the heater in water.
The Sunbeam SFH410 includes several safety features such as a tip-over switch that turns the unit off if it falls, an overheat protection system, and a cool-touch exterior.
It is not recommended to use an extension cord with the Sunbeam SFH410 heater as it may lead to overheating or pose a fire hazard. Plug the heater directly into a wall outlet.
Adjust the temperature settings using the thermostat control knob located on the top of the heater. Turn the knob clockwise to increase the temperature and counterclockwise to decrease it.
Regularly clean the heater every month during periods of frequent use. Ensure the unit is unplugged and cool before cleaning. Check the power cord and plug for damage before each use.
When storing the heater, ensure it is turned off, unplugged, and completely cool. Store it in a dry place away from direct sunlight, and avoid placing heavy objects on top of it.
If the heater keeps shutting off, it may be due to the tip-over switch being triggered, overheating, or a faulty thermostat. Ensure the heater is on a stable surface and not obstructed, and check the thermostat settings.
While the Sunbeam SFH410 has safety features, it is not recommended to leave any heater unattended or on overnight. Always turn off and unplug the heater when not in use.