Subaru PKX201H User Instructions

To start the Subaru PKX201H Pump, ensure the fuel valve is open, the choke is engaged if the engine is cold, and the throttle is set to the start position. Pull the recoil starter firmly until the engine starts.
Check that the fuel tank has sufficient fuel and that the fuel is fresh. Ensure the spark plug is clean and properly connected. Verify the choke and throttle positions, and inspect the air filter for blockages.
Perform routine maintenance every 50 hours of operation or more frequently if used in harsh conditions. This includes checking and changing the oil, inspecting the air filter, and examining hoses for wear.
Use SAE 10W-30 oil for general usage in a moderate climate. Consider SAE 5W-30 for cold conditions and SAE 30 for hotter environments.
Ensure that all hose connections are tight and check for any blockages in the suction hose. Verify that the pump casing is filled with water to create the necessary suction.
Remove the air filter cover, take out the filter element, and clean it with warm, soapy water. Rinse thoroughly and allow it to dry completely before reinstalling.
Turn off the fuel valve, remove the fuel cap, and drain the fuel into a suitable container. Run the engine until it stops to ensure the carburetor is empty.
Always operate the pump in a well-ventilated area, avoid overloading the pump, and use personal protective equipment such as gloves and goggles.
Ensure that the suction lift is within the pump’s specifications, and the suction hose is free of air leaks. Use the correct size and type of hose for the application.
Check that the pump is on a stable surface and ensure all mounting bolts are tight. Inspect the impeller for damage or debris and verify that the hoses are not kinked.