Subaru PKV401T User Instructions

Pages 19

Year 2006

Language(s)

of 19

Subaru PKV401T Pump Specification

The Subaru PKV401T Pump is a robust, high-performance water pump renowned for its reliability and efficiency in various applications. It is engineered with a powerful 404cc overhead valve (OHV) engine, delivering superior performance and fuel efficiency. The pump features a maximum delivery volume of 423 gallons per minute, making it ideal for heavy-duty tasks such as construction site dewatering, agricultural irrigation, and emergency flood control.

The PKV401T boasts a 4-inch suction and discharge port, which allows for quick water transfer, reducing downtime and increasing productivity. Its durable construction includes a cast iron volute and impeller, ensuring longevity and resistance to wear and corrosion under harsh conditions. The pump is equipped with a self-priming mechanism that facilitates easy startup and operation, even after initial use.

Designed with user convenience in mind, the PKV401T includes a large fuel tank capacity of 7.3 liters, providing extended operation time between refuels. The pump's lightweight yet sturdy frame enhances portability, allowing it to be easily transported to various job sites. Additionally, it includes a protective rollover frame that safeguards the engine and components from accidental damage.

The Subaru PKV401T Pump adheres to stringent environmental standards, incorporating features that minimize emissions and noise, thus ensuring compliance with regulations while promoting a safer working environment. Its easy maintenance design, featuring accessible service points and a low oil alert system, guarantees reliable performance and reduces downtime. Overall, the Subaru PKV401T Pump stands out as a versatile and dependable solution for demanding water transfer needs.

Subaru PKV401T Pump F.A.Q.

How do I properly start the Subaru PKV401T Pump?

To start the Subaru PKV401T Pump, ensure the fuel valve is open, the choke is in the closed position if the engine is cold, and the throttle is set to 'start' or 'run'. Pull the starter rope gently until resistance is felt, then pull sharply to start the engine.

What is the recommended maintenance schedule for the Subaru PKV401T Pump?

Regular maintenance for the Subaru PKV401T Pump includes checking the oil level before each use, changing the oil every 50 hours of operation, cleaning the air filter every 25 hours, and inspecting the spark plug every 100 hours.

How can I troubleshoot if the pump fails to start?

If the pump fails to start, check the fuel level, ensure the spark plug is functioning, verify the choke and throttle settings, and inspect the air filter for any blockages.

What should I do if the pump is not drawing water efficiently?

Ensure there are no leaks in the suction hose, check for obstructions in the inlet and impeller, and verify that the pump is properly primed before operation.

How do I change the oil in the Subaru PKV401T Pump?

To change the oil, first warm up the engine, then stop it and remove the oil drain plug. Allow the oil to completely drain into a suitable container, then replace the drain plug and refill with recommended oil type and quantity.

What type of fuel should be used in the Subaru PKV401T Pump?

Use clean, fresh unleaded gasoline with an octane rating of at least 87. Avoid using fuel with more than 10% ethanol, as this can damage the engine.

How can I prevent the pump from overheating?

Ensure adequate ventilation around the pump, do not operate in enclosed spaces, and regularly check for clogs in the cooling fins or debris around the engine that could impede airflow.

What is the proper way to store the pump during the off-season?

Drain the fuel tank and carburetor, change the engine oil, clean the air filter, and store the pump in a dry, covered location to protect it from dust and moisture.

How do I clean the air filter on the Subaru PKV401T Pump?

Remove the air filter cover, take out the filter, and clean it with warm, soapy water. Rinse thoroughly, let it dry completely, and lightly oil the filter before reinstalling.

What should I check if the pump is vibrating excessively during operation?

Inspect the mounting bolts to ensure they are tight, check for bent or damaged impeller, and verify that the pump is on a stable, level surface.