Subaru Forester 2.0XT Premium 2014 Remote Start Quick Reference

To reset the maintenance light, turn the ignition switch to the "ON" position. Press the trip reset button until the screen displays the mileage. Hold the button until the light blinks, indicating the reset is complete.
The recommended oil type for the 2014 Subaru Forester 2.0XT Premium is 5W-30 synthetic oil. Ensure it meets API certification for optimal performance.
To improve fuel efficiency, maintain proper tire pressure, use cruise control on highways, reduce unnecessary weight, and ensure regular maintenance such as oil changes and air filter replacements.
The recommended tire pressure for a 2014 Subaru Forester 2.0XT Premium is 33 psi for both the front and rear tires. Always check the owner's manual or the label on the driver's side door for confirmation.
To pair your phone, enable Bluetooth on your device. On the Forester's infotainment system, select "Settings" > "Bluetooth" > "Pair Device." Follow the prompts to complete the pairing process.
Common causes include a loose gas cap, faulty oxygen sensor, catalytic converter issues, or mass airflow sensor problems. It is recommended to have a diagnostic test performed to pinpoint the exact cause.
It is recommended to replace the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check the filter during regular maintenance for any signs of dirt or damage.
If the battery dies, you can jump-start the vehicle using jumper cables and another car. Connect the cables to the corresponding positive and negative terminals, start the donor car, and then the Forester.
To check the transmission fluid, ensure the car is on a level surface and the engine is warm. Locate the dipstick, remove it, wipe it clean, reinsert it, and then remove it again to check the fluid level.
The 2014 Subaru Forester 2.0XT Premium has a towing capacity of 2,400 pounds. Ensure that the trailer's weight and the load do not exceed this limit for safe towing.