Sony DAV-HDX585 Quick Setup Guide
![Sony DAV-HDX585 manual cover](/images/1d9494c045895193bbb19884/thumbs/thumb175x175.webp)
To connect the Sony DAV-HDX585 to your TV, use an HDMI cable. Connect one end to the HDMI OUT port on the DAV-HDX585 and the other end to an HDMI IN port on your TV. Ensure both devices are powered off before connecting.
Check that the volume is turned up on both the Sony DAV-HDX585 and your TV. Ensure that the speaker wires are properly connected. Also, verify that the correct input source is selected on the DAV-HDX585.
To perform a factory reset, press the FUNCTION button on the remote until “DVD/CD” is displayed. Press and hold the STOP button on the unit for more than five seconds until “RESET” appears on the display.
The Sony DAV-HDX585 does not support firmware updates via USB or network. Check the Sony website or contact support for any available updates and instructions.
Ensure the batteries in the remote control are functioning and correctly inserted. Check for any obstructions between the remote and the DAV-HDX585. Try resetting the remote by removing the batteries and pressing all buttons.
Use a soft, dry cloth to clean the exterior of the unit. Avoid using any liquid cleaners. Ensure that the ventilation openings are not blocked to prevent overheating.
Place the front speakers equidistant from the TV and at ear level. The center speaker should be directly above or below the TV. The surround speakers should be positioned slightly behind the listening area.
Ensure the DVD is compatible with the region code set on your DAV-HDX585. Check if the disc is dirty or scratched, and try cleaning it with a soft cloth.
Yes, you can connect your smartphone using an AUX cable to the AUDIO IN ports. Set the function to TV/VIDEO on the DAV-HDX585 to play music from your smartphone.
Ensure the unit is powered on. If the tray still doesn't open, try unplugging the power cord for a few minutes and then reconnecting it. If the problem persists, the unit may require servicing.