Smart Fortwo Cabrio 2018 Operator's Manual
![Smart Fortwo Cabrio 2018 Car manual cover](/images/TkkZIvSaGiVOvGhSbbIwGlGT/thumbs/thumb175x175.webp)
To operate the convertible roof, press the button located on the center console. The roof can be opened or closed at speeds up to 60 km/h (37 mph). Ensure the vehicle is parked on a flat surface if manually adjusting the roof components.
If the convertible top gets stuck, check for any obstructions in the roof mechanism. Turn the car off and on to reset the system. If the problem persists, consult the owner's manual or contact a certified Smart technician.
Regular maintenance should be performed every 10,000 miles or 12 months, whichever comes first. This includes oil changes, brake inspections, and tire rotations. Refer to the vehicle's maintenance schedule for specific details.
The Smart Fortwo Cabrio 2018 is recommended to use premium unleaded gasoline with an octane rating of 91 or higher for optimal performance and efficiency.
To improve fuel efficiency, maintain proper tire pressure, avoid excessive idling, and adhere to recommended service intervals. Additionally, minimize carrying unnecessary weight and use cruise control on highways when possible.
To jump-start, connect the positive cable to the positive terminal of the dead battery and the other end to the positive terminal of the booster battery. Connect the negative cable to the negative terminal of the booster battery and the other end to a ground point on the vehicle with the dead battery. Start the booster vehicle first, then the Smart Fortwo.
To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Remove the electrical connector and the dust cover. Twist the old bulb counterclockwise to remove it and install the new bulb by turning it clockwise. Reattach the dust cover and electrical connector.
Common causes for a check engine light include a loose gas cap, faulty oxygen sensors, or issues with the catalytic converter. It's important to diagnose the issue using an OBD-II scanner or by consulting with a professional mechanic.
To change the windshield wipers, lift the wiper arm away from the windshield, press the tab on the wiper blade to release it, and slide it off the arm. Attach the new wiper blade by sliding it onto the arm until it clicks into place. Lower the wiper arm back onto the windshield.
If experiencing Bluetooth connectivity issues, ensure the device is discoverable and within range. Delete any unused devices from the car's Bluetooth list and restart both the device and the car's infotainment system. If problems persist, consult the vehicle's manual or seek assistance from a dealer.