Skil 3320-01 Safety Instructions

Pages 60

Year 2008

Language(s)

of 60

Skil 3320-01 Drill Press Specification

The Skil 3320-01 Drill Press is a versatile and reliable tool designed for precision and ease of use in woodworking and metalworking applications. It features a powerful 3.2-amp motor, providing consistent performance for various drilling tasks. The drill press operates with a five-speed system, offering speed variations from 570 to 3,050 RPM, which allows users to adjust the speed according to the material being drilled, ensuring accuracy and control.

The drill press is equipped with a 10-inch swing, which accommodates a wide range of projects, and a 1/2-inch keyed chuck, suitable for a variety of drill bit sizes. Its X2 2-beam laser system enhances precision by providing a clear drilling guide, helping users achieve exact hole placement. The work surface, a tilting work table, can bevel from 0 to 45 degrees, facilitating angled drilling and increasing the tool's versatility for complex projects.

For added stability and safety, the Skil 3320-01 is constructed with a cast iron base that minimizes vibrations during operation. This robust build ensures durability and longevity, even with frequent use. The drill press also includes a depth adjustment system, allowing users to set precise drilling depths, which is crucial for tasks requiring consistent hole depths. Its compact design makes it suitable for small workshops or garages, offering professional-grade performance in a space-saving package. The Skil 3320-01 Drill Press is ideal for both hobbyists and serious DIY enthusiasts looking for a reliable and versatile drilling solution.

Skil 3320-01 Drill Press F.A.Q.

How do I properly set up the Skil 3320-01 Drill Press for the first time?

To set up the Skil 3320-01 Drill Press, begin by assembling the base, column, table, and head according to the instructions in the user manual. Ensure all screws are tightened securely. Adjust the table height and angle as needed for your project.

What should I do if the drill press motor does not start?

If the motor does not start, check that the drill press is plugged in properly and that the power switch is on. Verify that the circuit breaker has not tripped. Inspect the power cord for damage and replace it if necessary.

How can I change the drill press speed?

To change the speed, adjust the belt position on the pulleys. First, ensure the drill press is turned off and unplugged. Open the pulley cover, loosen the tension lock knob, and shift the belt to the desired pulley configuration. Tighten the tension lock knob before closing the cover.

What maintenance is required for the Skil 3320-01 Drill Press?

Regular maintenance includes checking and tightening all bolts and screws, lubricating moving parts, and cleaning the drill press to remove dust and debris. Inspect the belt for wear and replace it if it shows signs of damage.

How do I align the drill press table?

To align the table, loosen the table lock and adjust the table to the desired angle using a protractor or square. Once aligned, tighten the table lock securely to hold the position.

What should I do if the drill bit gets stuck in the material?

If a drill bit gets stuck, turn off the drill press immediately. Carefully reverse the bit manually or use pliers to gently work it out of the material. Ensure the material is properly secured before resuming work.

How can I improve the accuracy of my drilling?

To improve accuracy, ensure the material is clamped securely and use a center punch to mark the drilling spot. Adjust the speed according to the material and use sharp, high-quality bits.

What should I check if the drill press vibrates excessively during operation?

Excessive vibration can be caused by an unbalanced bit, loose components, or improper belt tension. Check that the bit is properly installed and balanced, tighten any loose parts, and verify the belt tension is correct.

How do I replace the belt on the Skil 3320-01 Drill Press?

To replace the belt, turn off and unplug the drill press. Open the pulley cover, loosen the tension lock knob, and remove the old belt. Install the new belt by placing it over the desired pulley configuration. Tighten the tension lock knob and close the cover.

What are some safety tips for using the Skil 3320-01 Drill Press?

Always wear safety goggles and hearing protection. Avoid loose clothing and jewelry. Ensure the work area is clean and well-lit. Never leave the drill press running unattended, and always unplug it before making adjustments or changing accessories.