Shure ANI4OUT User Guide

Shure ANI4OUT Interface manual cover
Pages 23
Year 0
Language(s)
English en

Shure ANI4OUT Interface Specification

The Shure ANI4OUT Interface is a sophisticated audio networking device designed to seamlessly integrate analog audio systems with digital audio networks. This interface is equipped with four analog audio outputs, allowing users to convert digital audio signals from Dante network streams into high-quality analog outputs. It supports a wide range of applications, including conferencing, sound reinforcement, and broadcast, making it highly versatile for various professional audio environments.

The ANI4OUT features high-resolution 24-bit converters, ensuring superior audio fidelity and minimal signal degradation during the conversion process. It offers a sampling rate of up to 96 kHz, catering to a broad spectrum of audio quality requirements. The device is designed for easy installation and configuration, with a user-friendly web-based interface that simplifies network setup and management. Additionally, it supports Power over Ethernet (PoE), which eliminates the need for separate power cables and enhances installation flexibility.

Connectivity is further expanded through its RJ-45 network port, providing seamless integration into existing Dante audio networks. The ANI4OUT is compatible with Shure's Designer System Configuration software, allowing for advanced audio routing and control options. It also includes LED indicators for power and network status, providing visual confirmation of device operation.

With a compact, robust design, the Shure ANI4OUT Interface is engineered to deliver reliable performance in demanding professional settings. Its ability to bridge the gap between analog and digital audio systems makes it an essential tool for audio professionals seeking to optimize their sound setups while maintaining high-quality audio standards.

Shure ANI4OUT Interface F.A.Q.

How do I connect the Shure ANI4OUT interface to my network?

To connect the Shure ANI4OUT to your network, use an Ethernet cable to connect the device's network port to your network switch. Ensure that the network supports Dante audio networking if you plan to use Dante features.

What steps are required to set up Dante audio with the ANI4OUT?

First, install Dante Controller on your computer. Connect the ANI4OUT to the network, then use Dante Controller to route audio from your Dante-enabled devices to the ANI4OUT. Make sure the ANI4OUT is synced to the same clock as your Dante network.

How can I perform a factory reset on the ANI4OUT?

To perform a factory reset, press and hold the reset button on the device for approximately 10 seconds until the status indicator flashes. This will restore the unit to its default settings.

What troubleshooting steps should I take if there is no audio output from the ANI4OUT?

Check all cable connections and ensure the ANI4OUT is properly connected to the network. Verify that audio routing is correctly configured in Dante Controller and ensure that the output device is properly powered and connected.

How do I update the firmware on the Shure ANI4OUT?

Download the latest firmware from the Shure website. Connect the ANI4OUT to your computer via the network and use Shure's Device Discovery application to locate the ANI4OUT. Follow the instructions provided with the firmware update package.

Can the ANI4OUT be powered via Power over Ethernet (PoE)?

Yes, the ANI4OUT supports PoE. Connect it to a PoE-enabled network switch or use a PoE injector to power the device without an external power supply.

How do I configure the output levels on the ANI4OUT?

You can configure the output levels using the web-based control interface. Access it by entering the device's IP address in a web browser, then navigate to the audio settings section to adjust the levels as needed.

What is the recommended maintenance for the ANI4OUT?

Regularly check and ensure that the device firmware is up-to-date. Clean the unit with a dry, soft cloth and avoid exposing it to extreme temperatures or moisture. Periodically verify network connections and Dante configurations.

How can I monitor the status of the ANI4OUT?

Use the Shure Web Device Discovery or Dante Controller software to monitor the ANI4OUT. These tools provide real-time information about connectivity, clock status, and audio routing.

What should I do if the ANI4OUT does not appear in Dante Controller?

Ensure the device is powered on and properly connected to the network. Verify that your computer is on the same network and subnet. Disable any firewalls that might block Dante traffic and verify the network settings on the ANI4OUT.