Shark Stratos IZ840H Owner's Guide

To assemble the Shark Stratos IZ840H Vacuum, start by attaching the wand to the main body. Ensure it clicks into place. Then attach the desired floor nozzle or accessory to the end of the wand. Plug in the vacuum and it is ready to use.
If your vacuum loses suction, check for blockages in the hose, wand, and floor nozzle. Clean or replace the filters if they are dirty. Ensure the dust bin is empty and properly attached.
The pre-motor filters should be cleaned every month, while the HEPA filter should be cleaned every 12 months. Rinse them with water and let them dry completely before reinstalling.
Yes, the Shark Stratos IZ840H is suitable for hardwood floors. Use the appropriate floor setting to ensure gentle cleaning.
The 'brush roll' indicator light lets you know if the brush roll is functioning properly. A green light means it is working, while a red light indicates a jam or blockage.
To clean the dust bin, detach it from the vacuum, empty the contents into a trash bin, and rinse it with water. Allow it to dry completely before reattaching it to the vacuum.
If the vacuum is making loud noises, check for blockages or debris in the brush roll, hose, or filters. Make sure all parts are securely connected.
To store the vacuum, wrap the cord around the hooks provided, ensure the dust bin is empty, and place it in an upright position in a dry area.
The Shark Stratos IZ840H typically comes with a crevice tool, an upholstery tool, and a dusting brush for versatile cleaning.
To maintain battery life, avoid letting the battery completely drain. Charge it fully before using it again and store the vacuum in a cool, dry place.