Shark SONIC DUO KD450W Owner's Guide

To assemble the Shark SONIC DUO KD450W Cleaner, attach the handle to the main body until it clicks into place. Ensure all parts are securely connected before plugging in the device for use.
For hardwood floors, use the designated cleaning solution and pad. Fill the tank with the solution, attach the pad to the head, and use the appropriate setting for delicate surfaces.
Check if the power cord is properly plugged in and inspect the outlet for power. Ensure the handle is fully attached as it contains the power switch mechanism.
Ensure the solution tank is filled and correctly attached. Check for blockages in the dispensing nozzle and clean them if necessary.
Replace the cleaning pads after every major cleaning session or when they become visibly dirty or worn to maintain optimal cleaning performance.
It is recommended to use Shark's designated cleaning solutions to avoid damaging the cleaner or voiding the warranty. Homemade solutions may not be compatible.
Empty and rinse the solution tank, clean the pads, wipe down the unit, and check for any blockages in the nozzles to ensure longevity and performance.
Store the cleaner in a cool, dry place with the handle locked in the upright position. Ensure the power cord is wound neatly to prevent damage.
Streaks can occur if the cleaning pad is too dirty or if the wrong solution concentration is used. Ensure pads are clean and follow the recommended solution mix.
For tile floors, use the deep cleaning setting with the appropriate pad and solution designed for hard surfaces to effectively remove dirt and grime.