Shark Rotator NV95 Owner's Guide

To clean the filters, first unplug the vacuum. Remove the dust cup, then take out the foam and felt filters. Rinse them under lukewarm water until the water runs clear. Let them air dry for at least 24 hours before reinstalling.
Check for blockages in the hose, dust cup, and filters. Ensure the dust cup is empty, and clean the filters if necessary. Also, inspect the brush roll for tangled hair or debris.
The HEPA filter should be replaced every 12 months for optimal performance. However, if you notice a decrease in suction or persistent odors, consider replacing it sooner.
Yes, the Shark Rotator NV95 is suitable for hardwood floors. Ensure the brush roll is turned off to prevent scratching the surface.
Turn off and unplug the vacuum. Lay it down and carefully cut away hair and debris from the brush roll using scissors or a seam ripper. Avoid damaging the bristles.
To empty the dust cup, detach it from the vacuum, hold it over a trash can, and press the release button to dispose of the contents. Clean the dust cup periodically to maintain hygiene.
Check if the vacuum is properly plugged in and the outlet is functioning. Inspect the power cord for damages. If the vacuum still doesn't turn on, consult the user manual or contact customer support.
Yes, the Shark Rotator NV95 is effective for pet hair removal due to its strong suction and specialized pet hair tool attachments.
Regularly clean the filters and brush roll, empty the dust cup after each use, and store the vacuum in a dry place. Inspect the vacuum for blockages or damages periodically.
The Shark Rotator NV95 typically comes with a crevice tool, dusting brush, and pet hair power brush. Use the crevice tool for tight spaces, the dusting brush for delicate surfaces, and the pet hair power brush for upholstery and pet hair.