Shark Rocket HV370 Owner's Guide

To assemble the Shark Rocket HV370, attach the wand to the motorized floor nozzle, then connect the handheld vacuum to the top of the wand. Make sure each part clicks securely into place.
First, check for blockages in the nozzle, wand, or hose. Clean the dust cup and filter. Ensure all connections are tight and the brushroll is not obstructed.
For optimal performance, rinse the pre-motor foam and felt filters every three months and let them air dry completely before reinstalling.
You can use the wall mount to store the vacuum vertically or disassemble it into its main components and store them flat in a closet.
Turn off and unplug the vacuum. Use a coin to unlock the brushroll access door, remove the old brushroll, and insert the new one. Ensure it is seated correctly before closing the door.
Check for blockages in the vacuum, a full dust cup, or debris on the brushroll. Clear any obstructions and ensure all parts are securely attached.
Regularly check the brushroll for tangled hair and debris. Use scissors to carefully remove any obstructions and ensure it spins freely.
The Shark Rocket HV370 typically includes a duster crevice tool, a pet hair tool, a dusting brush, and an accessory bag. Check your model for specific attachments.
Yes, the Shark Rocket HV370 is suitable for hardwood floors. Use the hard floor setting to prevent scratching and ensure effective cleaning.
Check the electrical connections and ensure the vacuum is plugged in. If the lights still don't work, the LED unit may need replacement. Contact Shark customer service for assistance.