Shark Rocket Duoclean UV480 Owner's Guide

To clean the filters, first unplug the vacuum. Remove the dust cup and take out the foam and felt filters. Rinse them under lukewarm water until the water runs clear. Let them air dry for at least 24 hours before reinstalling.
Check for blockages in the hose, brush roll, and dust cup. Ensure the filters are clean and properly installed. Also, verify that the dust cup is not full.
The HEPA filter should be replaced every 12 months for optimal performance, or more frequently if necessary.
Store the vacuum in a cool, dry place with the cord wrapped neatly around the hooks provided. Ensure the vacuum is turned off and unplugged before storing.
Regularly check the brush roll for hair or string wrapped around it. Use scissors to carefully cut away any debris. Ensure the brush roll can spin freely.
Turn off and unplug the vacuum immediately. Clear any blockages and let the vacuum cool for at least 45 minutes before attempting to use it again.
Yes, the dust cup can be rinsed with water. Ensure it is completely dry before reinstalling to prevent mold or damage.
Check for loose connections or frayed wires. Ensure the vacuum is plugged into a working outlet. If the problem persists, contact Shark customer service.
To switch to handheld mode, detach the wand from the main body by pressing the release button. Attach any desired accessory to the handheld vacuum for versatile cleaning.
Unusual noises may be due to blockages, a full dust cup, or debris in the brush roll. Inspect these areas and clear any obstructions to resolve the issue.