Shark Rocket AH400 Owner's Guide
![Shark Rocket AH400 Vacuum manual cover](/images/ZyMFZoopBIyNDxrftSqDzSRy/thumbs/thumb175x175.webp)
To assemble the Shark Rocket AH400 Vacuum, connect the wand to the floor nozzle, attach the hand vacuum to the wand, and secure any desired attachments. Ensure all connections click into place.
Check for blockages in the hose, wand, and brush roll. Make sure the dust cup is empty and filters are clean. Clean or replace filters if necessary.
It is recommended to clean the pre-motor foam and felt filters every month and the post-motor filter once a year. Replace them as needed.
Use the hard floor setting for bare floors and the carpet setting for carpets and rugs. Adjust the suction and brush roll speed accordingly.
The vacuum includes a dusting brush, crevice tool, and pet multi-tool. Use the dusting brush for delicate surfaces, the crevice tool for tight spaces, and the pet multi-tool for pet hair.
Regularly check the brush roll for tangled hair and debris. Remove the brush roll cover to clean it thoroughly. Use scissors to cut away any entangled hair.
Ensure that all parts are securely connected and check for blockages in the hose or brush roll. Inspect the filters and clean or replace them if necessary.
Detach the dust cup from the vacuum body, hold it over a trash bin, and press the release button to open the bottom door and empty the contents.
Yes, the filters are washable. Rinse them under lukewarm water until the water runs clear. Let them air dry completely for at least 24 hours before reinserting.
Store the vacuum in a cool, dry place. If possible, hang it on a wall mount using the available hook on the handheld vacuum for easy storage.