Shark NP319 Owner's Guide
![Shark NP319 Vacuum manual cover](/images/iyUctbTyGkcakmizdJXbRktF/thumbs/thumb175x175.webp)
To assemble your Shark NP319 vacuum, begin by attaching the handle to the main body until it clicks into place. Next, connect the hose to the base and secure any additional attachments as needed. Refer to the user manual for detailed instructions and diagrams.
If your Shark NP319 loses suction power, check for blockages in the hose and filters. Ensure the dust cup is empty and the filters are clean. It is recommended to wash the filters every month and let them air dry completely before reinstalling.
The pre-motor foam and felt filters should be cleaned every month, while the HEPA filter should be cleaned every 12 months. Rinse them under water without soap and let them air dry thoroughly before reinserting.
If the brush roll is not spinning, check if the vacuum is in the right floor setting. Ensure there are no obstructions and that the brush roll is properly installed. Cleaning the brush roll regularly will help prevent this issue.
To maintain the battery life, charge the vacuum fully before initial use. Avoid letting the battery completely drain frequently and store the vacuum in a cool, dry place when not in use.
Yes, the Shark NP319 is safe to use on hardwood floors. Ensure the vacuum is set to the appropriate floor setting to avoid any potential damage.
If your vacuum overheats, turn it off and unplug it. Check for blockages and clean the filters. Allow the vacuum to cool down for at least 45 minutes before attempting to use it again.
To replace the belt, unplug the vacuum and remove the bottom cover of the vacuum head. Slide off the old belt and replace it with a new one, ensuring it is properly aligned with the brush roll and motor pulley.
The Shark NP319 typically includes a crevice tool, dusting brush, and upholstery tool. Each attachment can be connected to the hose or wand for cleaning tight spaces, dusting surfaces, and vacuuming furniture respectively.
To save space, detach the handle and store it alongside the main vacuum body. Utilize the storage hooks on the vacuum for the hose and power cord. Store attachments in a designated area or bag.