Shark Navigator Lift Away CU500 Owner's Guide

Shark Navigator Lift Away CU500 Vacuum manual cover
Pages 9
Year 2021
Language(s)
English en

Shark Navigator Lift Away CU500 Vacuum Specification

The Shark Navigator Lift-Away CU500 Vacuum is a versatile cleaning appliance designed for efficient and convenient home maintenance. It features a Lift-Away design, allowing users to detach the canister for portable cleaning and access to hard-to-reach areas, such as stairs and furniture. This vacuum incorporates advanced cyclonic technology, ensuring strong suction power for both carpets and hard floors, and is engineered to maintain performance by separating fine dirt from the air. The CU500 is equipped with Anti-Allergen Complete Seal Technology and a HEPA filter, which work together to trap 99.9% of dust and allergens inside the vacuum, enhancing indoor air quality and providing relief for allergy sufferers. It offers a spacious dust cup capacity, reducing the frequency of emptying and enhancing overall cleaning efficiency. The vacuum comes with a range of accessories, including a crevice tool, dusting brush, and pet power brush, to address various cleaning needs. A swivel steering mechanism ensures excellent maneuverability around furniture and obstacles, while an extra-long power cord extends reach without frequent unplugging. The Shark Navigator Lift-Away CU500 is engineered for user-friendly operation, featuring easy-to-use controls and a lightweight design for reduced fatigue during extended cleaning sessions. With its robust construction and comprehensive feature set, the Shark Navigator Lift-Away CU500 Vacuum is an ideal choice for homeowners seeking a powerful, adaptable, and efficient cleaning solution.

Shark Navigator Lift Away CU500 Vacuum F.A.Q.

How do I assemble the Shark Navigator Lift Away CU500 Vacuum?

To assemble the Shark Navigator Lift Away CU500 Vacuum, attach the wand to the floor nozzle, then connect the handle to the top of the wand. Secure the dust cup by aligning it with the main body and clicking it into place.

What should I do if the vacuum loses suction?

If the vacuum loses suction, check for blockages in the hose and filters. Clean or replace the filters if necessary, and ensure that the dust cup is empty and properly attached.

How often should I clean the filters on my Shark Navigator CU500?

It is recommended to clean the pre-motor foam and felt filters every three months and the HEPA filter once a year. Rinse them with water and allow them to air dry completely before reinserting.

Why is the brush roll not spinning on my vacuum?

The brush roll may not spin if it is obstructed by debris or if the vacuum is not in the correct mode. Ensure the vacuum is in the correct carpet setting and check for any debris around the brush roll.

Can I use the Shark Navigator CU500 on hardwood floors?

Yes, the Shark Navigator CU500 is suitable for hardwood floors. Use the hard floor setting to deactivate the brush roll and prevent scratching.

How do I detach the canister for portable cleaning with the CU500?

To detach the canister, press the lift-away button on the side of the vacuum and pull the canister upward to separate it from the floor base for portable cleaning.

What is the best way to store the vacuum when not in use?

Store the vacuum in an upright position in a cool, dry place. Ensure the cord is wrapped neatly, and no parts are obstructing the air flow.

How do I clean the dust cup on the Shark Navigator CU500?

To clean the dust cup, press the release button to remove it, empty the contents into a trash bin, and rinse it with water if necessary. Make sure it is completely dry before reinstalling.

My vacuum is making a loud noise, what could be the issue?

A loud noise could be due to a blockage or debris caught in the brush roll. Check all hoses and the brush roll for obstructions and clear any debris found.

How do I replace the belt on the Shark Navigator CU500?

To replace the belt, unplug the vacuum and remove the screws on the bottom of the floor nozzle. Lift the cover, remove the old belt from the brush roll and motor shaft, and install the new belt by reversing the process.