Shark IQ Robot QR1000SR Owner's Guide
![Shark IQ Robot QR1000SR Vacuum manual cover](/images/aoMooeEwPwEGVvkuMCoHzlVd/thumbs/thumb175x175.webp)
To set up your Shark IQ Robot QR1000SR, first charge it fully on the dock. Download the SharkClean app, create an account, and follow in-app instructions to connect the robot to your Wi-Fi network.
Ensure the power switch on the side is turned on, the charging dock is plugged in, and the robot's charging contacts are clean. If issues persist, try repositioning the robot on the dock.
Remove the dustbin by pressing the release button, empty it, and rinse it with water. Remove the filters, tap off debris, and rinse them under water. Allow all components to dry completely before reassembly.
Ensure the robot's path is clear of obstacles and that the room is well-lit for the robot to navigate properly. Check if any areas are marked as no-go zones in the app.
Open the SharkClean app, navigate to the scheduling section, and set your preferred cleaning days and times. The robot will automatically start cleaning at the scheduled intervals.
Check for any debris or obstructions in the brush rolls, wheels, and suction path. Clean any tangled hair or threads and ensure all parts are securely attached.
Ensure your robot is connected to Wi-Fi. The SharkClean app will notify you of available updates. Follow the prompts in the app to download and install the latest firmware.
Yes, the Shark IQ Robot QR1000SR is designed to handle pet hair. Regularly empty the dustbin and clean the brush roll to maintain optimal performance.
To reset the robot, hold down the Dock and Clean buttons simultaneously for 10 seconds until you hear a chime. This will restore the robot to its factory settings.
Regularly empty the dustbin, clean the filters monthly, check and clean the brush roll weekly, and inspect the wheels and sensors for any debris.