Shark ION Rocket IR100 Owner's Guide
![Shark ION Rocket IR100 Vacuum manual cover](/images/TNfWdzUrkJiYUiMXmuiacCuP/thumbs/thumb175x175.webp)
To assemble the Shark ION Rocket IR100, attach the wand to the handheld vacuum, then connect the floor nozzle to the wand. Ensure all connections click into place securely. Attach any desired accessories.
First, check for blockages in the nozzle, wand, and dust cup. Ensure the dust cup is not full and that the filters are clean. Make sure the brush roll is free of tangled hair or debris.
To clean the filters, remove them from the vacuum. Rinse them under lukewarm water until the water runs clear. Allow the filters to air dry for at least 24 hours before reinstalling them.
Yes, the Shark ION Rocket IR100 is designed for use on both carpets and hard floors. For optimal performance, ensure the brush roll is properly maintained and adjust settings if necessary.
Ensure that the vacuum is fully charged. Check for any obstructions in the power switch area. If the vacuum still won't turn on, try resetting it by turning it off and back on after a few minutes.
Store the vacuum in a cool, dry place. Use the wall-mount storage hook if available to keep it off the floor. Ensure the dust cup is empty and the filters are clean before storage.
The brush roll should be replaced every 6 to 12 months, depending on usage. Regularly inspect the brush roll for wear and damage, and replace it if necessary to maintain optimal cleaning performance.
If the battery is not holding a charge, try fully discharging and recharging it. If the problem persists, consider replacing the battery or contacting Shark customer support for assistance.
To empty the dust cup, press the release button to detach it from the vacuum. Hold it over a trash can and open the bottom lid to release the debris. Ensure the dust cup is securely reattached before resuming use.
Regularly clean the filters, empty the dust cup, check for blockages, and inspect the brush roll for debris. Store the vacuum properly and charge the battery according to the manufacturer's instructions.